If you are in need of a product that can quickly help you get electrical measurements, then you might need a clamp multimeter. Clamp multimeters can measure voltage, currents, continuity, and resistance while maintaining great accuracy. Fluke has three multimeters that have very similar features, but a few key differences that you should know about. Let’s take a look all three, and see which one would be the best fit for you!
Fluke 323 Multimeter
The Fluke 323 multimeter is a noiseless, heavy-duty product that can withstand harsh conditions on the job. This product is 207 mm long by 75 mm wide, making it very easy to maneuver into tight spaces. The Fluke 323 also comes with True RMS AC voltage to provide consistently accurate measurements.
This product has an audible continuity sensor, which allows you to confirm whether a circuit conducts electricity or not. The Fluke 323 doesn’t measure DC current. The True RMS meter can read linear and non-linear loads, no matter what waveform they are, giving you more versatility with this product. This product’s simple design can also be used easily with thick gloves, for your on the job needs.
The Fluke 323 can measure currentsin a 30 mm wide conductor without actually touching the circuit. This allows you to read currents without interrupting circuits, due to the jaw opening measurers. This product can also read an AC current up to 400 amp. This is accompanied by reading AC and DC voltages up to 600 V, which is very convenient for most circuits. This product includes readings of resistance for 4 kilohms.
This product also comes with a large display for easy reading, and comes with a hold function to capture a reading for later reference. The Fluke 323 is made to be used for identifying AC voltages, switches, fuses, load currents, contacts, and continuity. This product also comes with a carrying case for your convenience.
More features of the Fluke 323 Multimeter
- Reads resistance of 400 Ω / 4000 Ω
- DC and AC voltage readings of 600 V
- AC current readings of 400 A
- Reads continuity of less than 70 Ω
Fluke 324 Multimeter
The Fluke 324 multimeter is very similar to the previous product, as it comes with a very similar design and layout. This product is easy to use with gloved hands, and is 207 mm in length with a width of 34 mm. This product also has True RMS sensing, which makes it more accurate than other products.
The Fluke 324, like the 323, comes with an audible sensor to allow you to know whether a circuit conducts electricity easily. This product’s True RMS also can read non-linear and linear loads, no matter what waveform they have. This product does not read DC currents, but does read temperatures from -10 to 400 degrees Celsius, or 14 to 752 degrees Fahrenheit.
This product can read a conductor 30mm wide without touchingit via jaw opening measures, which makes it convenient for reading circuits you can’t interrupt. This product also reads AC currents up to 400 amps, and DC and AC voltages up to 600 V. The Fluke 324 can also read resistance of up to 4 kilohms, which is a very similar reading spectrum to the previous product.
The Fluke 324 has a similarly large display, and has a great backlight to read in dimly lit areas. This product also works noiselessly, and is great for commercial as well as residential electric needs. This product also features a carrying case, like the previous product, and comes with a hold function for capturing displays.
More features of the Fluke 324 Multimeter
- Reads resistance of 400 Ω / 4000 Ω
- DC and AC voltage readings of 600 V
- AC current readings of 40 to 400 A
- Reads continuity of less than 30 Ω
Fluke 325 Multimeter
The Fluke 325 multimeter has many of the same features as the previous two products. This meter can be used easily with gloved hands, and is 207 mm long by 75 mm wide. This product also has True RMS reading capabilities for your convenience.
This product, like the previous two, comes with an audible sensor for circuits that conduct electricity, and a True RMS that can read linear or non-linear loads. This product can also read a current up to 30 mm wide with its jaw opening measures.
Unlike the previous products, the Fluke 325 can read DC currents up to 400 A. This product can also measure resistance up to 40 kΩ. This product also offers frequency measurements for added convenience. Similar to the previous products, this product can also measure temperatures from -10 to 400 degrees Celsius, or 14 to 752 degrees Fahrenheit.
This product also reads DC and AC voltages up to 600 V, and can read AC currents up to 400 A. The Fluke 325 is similarly noiseless, and has a rugged design to withstand harsh work environments. This multimeter has a great backlight display, and can capture a reading by using the hold function. This product also comes with minimum / maximum functionality, and a carrying case for your convenience.
More features of the Fluke 325 Multimeter
- Reads resistance of 400 Ω / 4000 Ω / 40 kΩ
- DC and AC voltage readings of 600 V
- AC and DC current readings of 40 to 400 A
- Reads continuity of less than 30 Ω
- Frequency readings of 5 Hz to 500 Hz
Recommendation
If you need a simplistic product that offers hold functions for screen capture, accurate True RMS readings, and a high continuity, then the Fluke 323 is the best choice for you. Conversely, if you prefer a product that offers the same accurate measurements with the True RMS, but with an additional backlight for low visibility and temperature readings, then the Fluke 324 may be your best choice. Alternatively, if you want a multimeter that has a broad range of readability, including DC currents, frequencies, and a higher resistance, then the Fluke 325 may be the best choice for you. All of these Fluke products would work well for your professional or at home needs, making any of them a great choice!